After you’ve attached the frame, you should attach the net. After that, you’ll need to secure the frame to the poles using brackets and nuts. You can use a C-type pole cap for straight poles and arched pole caps for curved ones. Once you’ve installed the net, you can then install the frame by measuring the poles.

You can also secure it to the floor by tying the netting to the stakes and the ground. Afterwards, you should make sure the net is secured to avoid any accidents. It’s best to use a sturdy thread that has been pre-cut to match the poles and the frame. You can secure your trampoline net by wrapping the netting around the poles with a sturdy upholstery needle. After that, you can attach the springs with ropes and anchors. For this step, you need to measure the frame from outer edge to outer edge and then the mat. Then, you’ll need to measure the area of your trampoline and the distance of the net. Then, run the netting through the strings.Īfter you’ve leveled the ground, you can install the trampoline net. You’ll need a spirit level to level them. Place the stakes at uneven intervals, about 18 inches apart. Then, purchase the nylon netting that matches the desired size. To build a mesh net, simply multiply the area of the trampoline by ten. If you’re using a DIY method, you can use a nylon netting to cover the trampoline. When the net is ready, it’s time to set up the trampoline. You’ll be glad you did! After you’ve installed the net, you can jump on it with confidence. When you’re done, you can test your trampoline. Then, attach the balls to the spikes on the frame. Before installing the net, you should measure the frame by measuring from outer edge to outer edge. Depending on the type of frame you have, you may want to measure the frame’s diameter between three and nine inches.Īfter determining the diameter of the frame, you can install the net. Some poles have notched ends, so you’ll need to slide the smaller one into the bigger one. The distance between each pole should be between six to twelve inches. To measure the diameter, lay a measuring tape from puter edge to puter edge. Trampoline poles are usually arched or straight.

Next, use a measuring tape to measure the diameter of the frame. Once you’ve cleared the area, attach the poles to the frame. It’s important to ensure there are no obstructions between the net and the trampoline, so that it won’t fall off. Once you have your trampoline, you will need to clear a space for the net to go. To set up your net, you will need poles and netting, hangers and connectors. A trampoline net is a great way to protect a child’s head when jumping.

Setting up trampoline